Hi,
I was using JMFS v1.04 and following showthread.php?t=455968 for a TCD746320 using a WD20EZRX
The copy went well.
But expand gives: "Expand did not finish successfully"
I upgraded connected to SATA on a motherboard, but now have the new disk on a USB adapter. The USB adapter has worked for upgrading an earlier S2 Tivo to 1TB.
hdparm -i /dev/sdb gives "HDIO_GET_IDENTITY failed: Invalid argument"
hdparm -N /dev/sdb gives "HDIO_DRIVE_CMD(identify) failed: Invalid exchange
fdisk -l gives:
Disk /dev/sdb: 2000.3 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/sdb doesn't contain a valid partition table
And I don't want to put it into my Tivo at this point...
Any help is greatly appreciated.
Thanks,
Paul
(I tried to solve my own problem, and read a lot of pages on this forum, but I'm still confused).
I was using JMFS v1.04 and following showthread.php?t=455968 for a TCD746320 using a WD20EZRX
The copy went well.
But expand gives: "Expand did not finish successfully"
I upgraded connected to SATA on a motherboard, but now have the new disk on a USB adapter. The USB adapter has worked for upgrading an earlier S2 Tivo to 1TB.
hdparm -i /dev/sdb gives "HDIO_GET_IDENTITY failed: Invalid argument"
hdparm -N /dev/sdb gives "HDIO_DRIVE_CMD(identify) failed: Invalid exchange
fdisk -l gives:
Disk /dev/sdb: 2000.3 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/sdb doesn't contain a valid partition table
And I don't want to put it into my Tivo at this point...
Any help is greatly appreciated.
Thanks,
Paul
(I tried to solve my own problem, and read a lot of pages on this forum, but I'm still confused).